Exterior cleaning specialists · Leeds & West Yorkshire Call 07539 374 375[email protected]

Imprinted concrete sealing

Pattern imprinted concrete looks superb for a few years, then the seal wears off and it goes grey, patchy and slippery. Cleaning and resealing brings the colour back without touching the concrete itself.

Quickest way to a price: WhatsApp a photo of the area with your postcode and get a fixed quote, usually within 30 minutes.

  • The seal is what failsThe concrete is usually fine. It is the sealer on top that wears away, and that is what makes a drive look tired.
  • Colour brought backA fresh seal lifts the original colour and pattern out of the surface again.
  • Moss and algae removedGrowth sitting in the pattern and joints is treated and cleaned out before anything is applied.
  • Protected going forwardA sealed surface sheds water, resists oil and dirt and slows regrowth, so it stays looking right for longer.

How often it needs doing

Most imprinted drives need resealing every three to five years, sooner on a drive that gets full sun or heavy traffic. If yours has gone dull or the colour looks washed out, it is usually the seal rather than the concrete.

Pattern imprinted concrete restoration in Leeds, done right

Pattern imprinted concrete is a specialist surface that requires proper care to remove dirt, organic growth and staining while protecting its decorative stamped finish. Over time, weather and everyday use can dull the colour, wear away the original sealer and make surfaces slippery. As SmartSeal approved contractors, we use industry leading SmartSeal products and professional techniques to fully restore, protect and revitalise your concrete surfaces across Leeds, all in one place.

  1. 01

    Concrete cleaning and pressure washing

    Specialist cleaning to safely lift dirt, algae, moss and weathering.

    The process: our professional cleaning uses controlled pressure washing to safely remove build up without damaging the concrete or disturbing the stamped pattern. We also apply targeted treatments to eliminate organic growth and help reduce the rate of regrowth, keeping your surface cleaner for longer.

    The result: a refreshed surface that looks cleaner, improves safety underfoot and enhances the overall appearance of your property.

  2. 02

    Concrete clear sealing

    Enhance colour and protect your surface with premium SmartSeal clear coatings.

    The process: as pattern imprinted concrete ages, the original sealer wears away, leaving the surface dull, faded and vulnerable to damage. Using high grade SmartSeal clear sealers, our professional sealing process deepens and enhances the existing colour while creating a tough barrier against water ingress, staining and UV fading.

    The result: improved durability that maintains the surface condition for longer, reducing the need for costly repairs or replacement. This is the ideal solution for surfaces that are lightly to moderately worn and still in good structural condition.

  3. 03

    Concrete recolouring

    Restore heavily faded or worn concrete with professional grade SmartSeal colour coatings.

    The process: when pattern imprinted concrete becomes patchy, faded or worn, it can significantly pull down the appearance of your property. Our recolouring system applies high performance SmartSeal coatings that chemically bond to the surface, delivering a deep, uniform colour across the entire area. This process also allows for precise colour matching or complete colour changes depending on your preference.

    The result: a full visual transformation without the need for expensive replacement. It is the ultimate solution for surfaces where sealing alone is no longer enough.

Cleaning treatment foaming on a red imprinted concrete driveway
Cleaning treatment
Tub of SmartSeal imprinted concrete sealer and a brush on a freshly sealed driveway
SmartSeal imprinted concrete sealer

Common problems we fix with concrete recolouring

Over time, environmental wear can take a heavy toll on decorative concrete. Here are the most frequent issues our recolouring service completely transforms:

  • Severe colour fade: constant exposure to harsh UV rays and weathering drains the vibrancy right out of your driveway or patio.
  • Patchy and uneven tone: uneven foot traffic and ageing cause the surface to lose its uniformity, leaving a tired, mottled look.
  • Deep surface wear: years of daily use leave the concrete looking weathered, tired and stripped of its original character.
  • Beyond simple sealing: when the damage and fading run too deep, a standard clear seal simply will not cut it. Recolouring is required to bring it back to life.
Imprinted concrete sealing by Hydra Restore in Leeds

Free quote for imprinted concrete sealing

Tell us where you are and what needs cleaning. No obligation and no hidden costs.

Prefer WhatsApp? Send your address, postcode and a few photos to 07539 374 375 for a quote without a visit.

Before and after.

Each pair is the same spot on the same job, photographed before we started and after we finished.

Pattern imprinted concrete driveway in Garforth before sealing, dull and grey
Before
The same driveway after cleaning and sealing, dark and glossy
After

Imprinted concrete driveway, Garforth

Red pattern imprinted concrete driveway before recolouring, faded to pink
Before
The same driveway after recolouring and sealing, deep red
After

Red imprinted concrete driveway

Cobble pattern imprinted concrete before recolouring, patchy and worn
Before
The same imprinted concrete after recolouring in charcoal
After

Cobble pattern imprinted concrete

Red imprinted concrete before recolouring, worn and patchy
Before
The same imprinted concrete after recolouring and sealing
After

Red imprinted concrete

Close up of pattern imprinted concrete before sealing, grey with white blooming
Before
Close up of the same imprinted concrete after sealing
After

Imprinted concrete, close up

Red imprinted concrete driveway before pressure washing
Before
The same driveway after pressure washing, still wet
After

Red imprinted concrete, pressure washed

Imprinted concrete sealing questions.

Anything else, just ring. We would rather answer it than have you guess.

Pattern imprinted concrete resealing starts from £250. The price depends on the size of the driveway, its condition and whether the colour needs restoring. The quickest way to a fixed price is to send your postcode and a few photos of the area on WhatsApp to 07539 374 375. We usually reply within 30 minutes.

A typical imprinted concrete reseal includes:

  • Deep pressure washing and specialist degreasing
  • A colour tint restoration option if the surface has faded
  • A heavy duty acrylic sealant
  • An anti-slip additive for safe grip in winter

Yes. If the colour has faded we can add a colour tint as part of the reseal, which brings the original colour and pattern back out of the surface.

We apply an anti-slip additive with the sealer, so the driveway keeps safe grip in wet and wintry weather.

A professional sealer can extend the life of the clean by 3 to 5 years. It resists oil, tyre marks and dirt, and protects the surface from frost and colour fading from sunlight.

Yes. Hydra Restore is a SmartSeal approved applicator, trained to prepare, clean, chemically treat and seal ground surfaces.

Get a price in three steps on WhatsApp.

No site visit needed to get a price. Free and no obligation.

  1. Take a few photos

    Snap the drive, patio, paving or walls on your phone. A couple of clear shots is plenty.

  2. Send them on WhatsApp

    Add your postcode and send them to 07539 374 375. It takes less than 2 minutes.

  3. Get your fixed quote

    We price it by area, surface, contamination and access and reply with a fixed quote, usually within 30 minutes.

Prefer to talk? Call 07539 374 375 or request a quote online.

Checkatrade approved member SmartSeal registered installer

Vetted and trained. Checkatrade approved with 5 star reviews, SmartSeal approved applicators and fully insured.

Call now07539 374 375 WhatsAppPhoto quote
WhatsApp a photo for a quote